最小循环应力,minimum cyclic load

1)minimum cyclic load
最小循环应力

2)maximum cyclic stress
最大循环应力

3)Maximal strain cycle
最大应力应变循环

4)minimizing mean indication pressure's cycle
平均指示压力最小循环

5)cyclic minimization
循环最小化
1.
The starting point of derivation of the algorithm is the observation that the least square cost function for channel estimate is equivalent to the one for standard STBC decoding,so the iterative method of cyclic minimization can be exploited for resolving them.
该算法推导的出发点是观察到STBC-OFDM系统中关于信道参数的最小二乘代价函数与只有线性处理的STBC解码最小二乘代价函数是等价的,从而可利用循环最小化迭代方法求解。



6)cyclic stress
循环应力
1.
Experimental study on shearing deformation behavior of saturated clay under cyclic stress;
循环应力下饱和黏土剪切变形特性试验研究


2.
The cyclic stress?strain curves of ZA27 alloy with different treatment have been obtained in constant strain amplitude condition and the corresponding microstructure,the fractograyh obtained under different treatment condition are presented.
研究了ＺＡ２７ 合金在室温下的低周疲劳性能， 得到两种处理状态下ＺＡ２７ 合金在恒应变幅下的循环应力—应变曲线， 并对两种状态下合金的显微组织及疲劳试件断口进行了显微分析。


3.
The cyclic stress strain properties of ZA27 alloy and ZCuSn10P1 at ambient temperature were studied in this paper The cyclic stress strain curves of them are obtainaed The results show alloy ZA27displayed the cyclic softing character.
本文对ＺＡ２７和ＺＣｕＳｎ１０Ｐ合金在室温下的循环应力应变特性进行了测试，得到了两种材料的循环应力应变曲线。


更多例句>>


补充资料：动态应力-应变曲线
分子式：
CAS号：

性质：在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。


说明：补充资料仅用于学习参考，请勿用于其它任何用途。

最小循环应力,minimum cyclic load